
TCOMMAND OPERATING INSTRUCTIONS V1.3 09-03-2009 V18 SOFTWARE.DOC Page 15
10 Ganz DVR
Notes on using Touch Screen Keypad (V9 software) with GANZ ZR-DH1621NP
The keypad connects to the DVR via the T-command keyboard port. The keypad only transmits since the
DVR protocol at present does not provide any useful feedback data (i.e. status info etc.). Connections are as
follows: -
Keypad DVR
Pin 3(+TX) Pin 2(+RX)
Pin 6(-TX) Pin 3(-RX)
The keys that are displayed on the screen mainly mimic DVR front panel controls but some special keys
control the keypad screens.
Joystick.
At present the DVR does not support PTZ control. The joystick is only used for DVR OSD menu control (see
later).
Main Screen.
This is the primary screen to access all DVR functions and other keypad screens.
The DISPLAY, USER, SPOT, SEARCH, MENU, PTZ, PLAY and AUTO keys mimic the DVR front panel
controls. In addition the
SPOT, MENU and PLAY keys activate other keypad screens.
The UNIT and CAMERA keys only select other keypad screens, which mimic the 16 DVR front panel keys.
Spot Screen.
This screen is displayed by pressing the SPOT button on the Main screen. The Spot mode toggle command is
sent to the DVR.
The 1 to 16 and AUTO keys mimic the DVR front panel keys.
Pressing the Main MON key sends the Spot mode toggle command to the DVR.
EXIT returns to the Main screen.
Menu Screen.
This screen is displayed after pressing the MENU key on the Main screen. The DVR OSD Menu display
toggle command is sent to the DVR.
The ^ v > < ENTER keys navigate the DVR OSD menus and mimic FF REW PLAY RPLAY ENTER front
panel keys.
In addition, the Joystick can be used to control the menus. Tilt up mimics FF. Tilt down mimics REW. Pan
right mimics PLAY. Pan left mimics RPLAY. Twist clockwise mimics ENTER. Twist anticlockwise mimics
MENU.
CAMERA selects the Camera Select screen.
MENU toggles the DVR OSD Menu display but does not change the keypad-displayed screen.
EXIT returns to the Main screen.
Commentaires sur ces manuels