a. The ZR-DH921NP shall support LAN/WAN Ethernet access.
b. The ZR-DH921NP shall support Ethernet bandwidths of 10 Mbps or 100 Mbps.
c. The ZR-DH921NP shall have built-in web server .
d. The ZR-DH921NP shall support simultaneous Ethernet access by less than 8
work stations connected to the LAN/WAN.
e. The ZR-DH921NP shall support Static IP address. Default web server port shall
be 80 but shall be user assignable (from 80-19999).
f. The ZR-DH921NP should support for continuous time correction via Network
Time Protocol (NTP).
g. The ZR-DH921NP shall not stop recording during any Ethernet access, nor
shall it be possible to remotely issue a command via Ethernet to stop the
recording.
h. The ZR-DH921NP shall allow the user full programming of Ethernet
parameters, including the following:
1) DHCP (enable/disable)
2) IP address
3) Default gateway
4) Sub-net mask
5) Primary Name Server
6) Backup Name Server
7) HTTP port (80-19999)
C. The ZR-DH921NP shall have the following additional specifications:
1. Video
a. Horizontal resolution shall be 720 or 360 pixels.
b. Vertical resolution shall be 240 pixels.
c. Inputs
1) Camera
a) There shall be 9 looping camera inputs.
b) Inputs shall use BNC connectors.
c) Inputs shall be NTSC/EIA or PAL/CCIR compatible, depending on the
model selected.
d. Outputs
1) The ZR-DH921NP shall have three monitor outputs as follows:
a) One digital multi-screen monitor output
i) Composite video, BNC connector
ii) NTSC/EIA or PAL/CCIR compatible
Commentaires sur ces manuels